Get a Quote

Astacus2

Ultra Pure Water production for perfect analysis

  • Compact housing
  • Big touchscreen
  • Remote service module
  • Menus and wizards easy to use and mistake avoiding
  • Fixed and flexible dispenser
  • Easy access for cartridge exchange

The Astacus² system is designed for the production of ultra-pure water out of permeate from reverse osmosis or deionized water. The Astacus² water purification system is available in different configurations (Reagent, Analytical & LifeScience) to meet the specific requirements of ultra-pure water for different applications. Analytical is a version with a UV lamp for low TOC value. The Life Science version comes with a UV lamp and Ultrafiltration Module for low TOC and low endotoxin values.

An optionally integrated TOC sensor allows the user to monitor the TOC content permanently online. Besides that, the Astacus² can be configured as a bench top or bench-integrated system with an external panel and wall mounted (with an inclined display). The μS-control checks the conductivity of feed water to protect the cartridges against inappropriate feed water. If conductivity is too high the water flow will be rejected.

Technical Specifications -

  •  18.2 MOhm x cm | 0.055 µS/cm; Type I

    • - RESISTIVITY/CONDUCTIVITY

  •  Max. 2 L/min -

    • PRODUCTION RATE

  •  < 10 ppb (Reagent), < 5 ppb (Life Science) and < 3 ppb (Analytical)-

    • -TOTAL ORGANIC CARBON (TOC)

Astacus2 Advantages -

  •  COMPACT HOUSING
  •  BIG TOUCHSCREEN
  •  REMOTE SERVICE MODULE
  •  MENUS AND WIZARDS EASY TO USE AND MISTAKE AVOIDING
  •  NEW FIXED AND FLEXIBLE DISPENSER
  •  EASY ACCESS FOR CARTRIDGE EXCHANGE

Options

BENCH INTEGRATED CONFIGURATION (BI VERSION)

To save valuable benchtop space the system can be ordered as BI configuration. The system will be installed underneath the work bench and only the display and dispenser are mounted on the wall

WALL MOUNTED CONFIGURATION

To save valuable benchtop space the system can be ordered as wall mounted configuration. the whole system can be mounted on the wall with inclined display

TOC-MONITORING (TI VERSION)

The TOC monitoring during production and intermittent measurements during non-use periods allows to check the organic content in water continuously. The TOC value is measured between 1 and 999 ppb and can be shown in the display to monitor organic impurities.

memTap

To be integrated into an ultra pure water system with a max, flow rate of 2 L/min. Point of use dispense arm with integrated control unit. Two joint to move it horizontally and vertically allowing to fill containers up to 55 cm height. Volumetric dosing of ultra pure water allows filling of containers without the attention of user, dosing eange 0.1 – 99 L, variable input and storage of values, after volume has been dispensed system goes back to standby.

VOLUMETRIC DISPENSING

Our dispenser allows the volumetric controlled dispensing of water with an increment of 0.1 L and a tap volume from 0.1 to 99 L. The system prevents overflow of containers and allows to dispense water without supervising.

μS-CONTROL

The μS-control checks the conductivity of feed water to protect the cartridges against feed water of poor quality. If conductivity of the feed water is too high this water will be rejected and cannot influence the quality of the ultrapure water or harm the cartridge.

IQ/OQ documents

Validation documents for water purification systems.

Specifications -

Technical Specifications -
1 Ultrapure water quality 0.055 µS/cm; Type I
2 Resistivity 18.2 MegaOhm/cm
3 Total organic carbon (TOC) < 10 ppb reagent, < 5 ppb Life Science, < 3 ppb Analytica
4 Flow rate 2L/min, 1.5 L/min*
5 Bacteria < 1 cfu/mL
6 Particulate > 0.2 µm less than 1 particulate/mL
7 Pyrogen (endotoxins) < 0.001 EU/mL*
8 RNAse < 1 pg/mL*
9 DNAse < 5 pg/mL*
10 dimensions, weight, power 297 x 340 x 535 mm, 16-20 kg, 110 - 230 V
*with Life Science model
Feed Water Requirements-
1 Type of feed water Reverse osmosis (RO) water or deionized (DI) water
2 Feed water conductivity < 10 µS/cm
3 inlet pressure 0 to 1.5 bar
4 Total organic content (TOC) < 50 ppb
5 Temperature 5 to 25 °C
Copyrights © 2020 All Rights Reserved by Impact Pvt Ltd.
Call Call Us
Call WhatsApp
Copyright © 2021 Indasto. All Rights Reserved.